Acoustic Bass Guitars Music Gallery

Peavey Power Amp

Will a 12v 12mA electric bike battery be safe to connect to my portable guitar amp?

I I have a Peavey Solo amp, 10 watts output, that runs on eight 1.5v NiMH batteries. I want to connect just one 12v battery, but what type do I need? I don't want to under power or blow the amp!

If you can get the polarity right, it should be fine. 12 volts is 12 volts, the only time you would worry about current would be if your battery did not have enough.

By the way, your bike battery is probably 12 volts @ 12 amp-hours.

PEAVEY POWER AMP 1550W PER CH @ 4 OHMS $1,099.99 * Rated Power bridged 4 Ohms, 3050 Watts; 1 kHz @ ...

Peavey PV 1500 Power Amp $469.99 The Peavey PV 1500 Power Amp features Peavey's patented DDT distortion detection technique that virtually eliminates distortion. It also features Peavey's patented V-cooling design, which cools the power transistors more evenly than traditional heat-sink designs. 2-rackspace chassis.

Peavey PV 900 Power Amp $329.99 The Peavey PV 900 Power Amp delivers 300 watts per side @ 4 ohms and 450 watts @ 2 ohms. It features Peavey's patented DDT compression system and detented input gain controls, and less than 0.03% distortion. A real workhorse!

Peavey IPR 3000 Power Amp $399.99 Part of Peavey's IPR Series, the IPR 3000 Power Amp uses an advanced design that allowed Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. The rackmount power amp has a resonant switch-mode power supply and a high-speed class D topology that yields the supremely high audio resolution and productivity.The Peavey IPR 3000 features two channels with independent, 100Hz crossovers and produces 530W per channel at 8 Ohms, or 800W per channel at 2 Ohms. Peavey's exclusive DDT speaker protection with multipoint clip sampling leads a protection-circuitry suite that also includes DC, Temp, Signal, and Active safeguards, all referenced on the front panel with LED indicators. The power amp also features a variable-speed fan housed in a lightweight aluminum chassis.

Peavey IPR 1600 Power Amp $299.99 Part of Peavey's IPR Series, the IPR 1600 Power Amp uses an advanced design that allowed Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. The rackmount power amp has a resonant switch-mode power supply and a highhigh-speed class D topology that yields the supremely high audio resolution and productivity.The Peavey IPR 1600 features two channels with independent, 100Hz crossovers and produces 530W per channel at 4 Ohms, or 800W per channel at 2 Ohms. Peavey's exclusive DDT speaker protection with multi-point clip sampling leads a protection-circuitry suite that also includes DC, Temp, Signal, and Active safeguards, all referenced on the front panel with LED indicators. It also features a variable-speed fan housed in a lightweight aluminum chassis.

Peavey PV 2600 Power Amp $599.99 The Peavey PV 2600 Power Amp is a 2u rackmount unit. 2 x 900W RMS @ 4 ohms, 540W RMS @ 8 ohms, or 1800W RMS bridged mono. XLR, 1/4" and barrier strip inputs with DDT compression system, binding post and Speakon output connectors.

Peavey IPR DSP 1600 Power Amp with DSP $449.99 Part of Peavey's IPR Series, the IPR DSP 1600 Power Amp utilizes an advanced design that allowed Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. The rackmount power amp features two channels with independent, 100Hz crossovers and produces 530W per channel at 8 Ohms, or 800W per channel at 2 Ohms. It also has built-in, 32-bit, floating-point digital signal processing, and program-specific EQ presets that make common sound-reinforcement EQ treatments easy to perform, as well as delays, crossover, and stereo/mono operation with lockable security settings. A front-panel LCD screen allows users to quickly identify and assign presets. Like the rest of the Peavey IPR series, it has a resonant switch-mode power supply and a high-speed class D topology that yields the supremely high audio resolution and efficiency.The IPR DSP 1600 also has Peavey's exclusive DDT speaker protection with multi-point clip sampling which leads a protection-circuitry suite that also includes DC, Temp, Signal, and Active safeguards. The IPR DSP 1600 power amp has a variable-speed fan housed in a lightweight aluminum chassis.

Peavey ValveKing 212 Combo Amp $649.99 At the heart of the all-tube Peavey ValveKing 212 Combo Amp is a patent-pending, Class A/B Texture control that allows variable selection and combination of Class A and Class AB power structures. This gives you the ability to coax a wide range of tones out of the ValveKing 212. This Peavey amp features 12AX7 preamp and 6L6GC power amp tubes; specially voiced 12" ValveKing speakers; 2 footswitchable channels with independent 3-band EQ and volume; footswitchable boost on the lead channel; global resonance, presence, and reverb controls; a buffered effects loop; and dual speaker jacks in parallel.

Peavey KB 3 Keyboard Amp $298.99 The Peavey KB 3 amp is perfect for voice, keyboards, acoustic or electric guitar, and drum machines. You get 60W of clean power (80W with extension cab added) and a 12" speaker with tweeter in this versatile Peavey amplifier. 3 separate channels each have 2-band EQ and Channel 1 has mic input. Balanced XLR main out. Effects send/return. Headphone out with level control.

Peavey ValveKing 112 Combo Amp $419.99 At the heart of the all-tube Peavey ValveKing 112 Combo Amp is a patent-pending, Class A/B Texture control that allows variable selection and combinations of Class A and Class AB power structures. The Texture knob lets you coax a wide range of tones out of this amplifier. It features 12AX7 preamp and 6L6GC power amp tubes; a specially voiced 12" ValveKing speaker; 2 footswitchable channels with independent 3-band EQ and volume; footswitchable boost on the lead channel (with optional footswitch); global reverb control; a buffered effects loop; and external speaker jack.

Peavey 6505 212 Combo 2x12 Guitar Amp $1199.99 The 2x12 Peavey 6505 212 Combo Guitar Amp pours out a punishing 60W through 2 Sheffield 1200 speakers in a closed-back cabinet for aggressive tone with plenty of low end. The Peavey 6505 Amp features a footswitchable lead/rhythm channel select and reverb defeat. Master controls include 3-band EQ, resonance, and presence. Rhythm channel uses pre/post gain controls and bright/crunch switches. Lead channel has pre/post gain controls only. Footswitch included.The 6505 Series guitar amplifiers are named in celebration of Peavey's first 40 years, (1965-2005). While known as the 5150 Series, these amps became the undisputed go-to guitar amps for scores of rock, hardcore, and metal bands because of their raw tone, relentless power, and road-proven reliability.Made in the USA.

Peavey 6505 120W Guitar Amp Head $999.99 The Peavey 6505 120W Guitar Amp Head serves up 120W of pile-driving power for muscular crunch and soaring sustain. Equipped with 5 - 12AX7s in the preamp and 4 - 6L6s in the power amp. Includes footswitchable lead/rhythm channel select, effects loop, 3-band EQ, plus resonance and presence controls on each channel. Rhythm channel includes pre/post gain controls and bright/crunch switches. Lead channel includes pre/post gain controls only. Preamp output. Footswitch included. 4, 8, or 16 ohms.The 6505 Series guitar amplifiers are named in celebration of Peavey's first 40 years, (1965-2005.) While known as the 5150 Series, these amps became the undisputed go-to guitar amps for scores of rock, hardcore, and metal bands because of their raw tone, relentless power, and road-proven reliability.Made in the USA.

Peavey 6505 Plus 120W Guitar Amp Head $1199.99 The Peavey 6505+ 120W Guitar Amp Head is great for hardcore or metal players. 6 - 12AX7s in the preamp add up to even more terrifying punch and mind-rattling gain. Includes footswitchable lead/rhythm channel select, effects loop, 3-band EQ, plus resonance and presence controls on each channel. Rhythm channel includes pre/post gain controls and bright/crunch switches. Lead channel includes pre/post gain controls only. Preamp output. Footswitch included. 4, 8, or 16 ohms.The 6505 Series guitar amplifiers are named in celebration of Peavey's first 40 years, (1965-2005.) While known as the 5150 Series, these amps became the undisputed go-to guitar amps for scores of rock, hardcore, and metal bands because of their raw tone, relentless power, and roadproven reliability.Made in the USA.

Peavey ValveKing Half-Stack $899.99 The Peavey ValveKing half-stack guitar amplifier includes ValveKing 100 Head guitar amp and ValveKing 412 Cab.At the heart of the all-tube Peavey ValveKing 100 Head is a patent-pending, Class A/B Texture control that allows variable selection and combination of Class A and Class AB power structures. This gives you the ability to coax a wide range of tones out of the ValveKing 100 Head. It features 12AX7 preamp and 6L6GC power amp tubes; 2 footswitchable channels with independent 3-band EQ and volume; footswitchable boost on the lead channel; global resonance, presence, and reverb controls; a buffered effects loop; and dual speaker jacks in parallel.The perfect complement to the Peavey ValveKing 100 Head, the all-birch ValveKing Series 412 Cab features 4 - 12" ValveKing speakers, switchable mono/stereo operation, rear-mounted speakers, and 400W continuous power handling.

Peavey GPS 1500 Power Amp ¹ $999.99 For applications ranging from permanent installations to use by touring bands, GPS power amps are designed to meet the full spectrum of performance demands. They come in a full range of wattages, and all feature DDT speaker protection. All are backed by a 5-year warranty. The GPS 1500 delivers 750W RMS per channel @ 4 ohms. 2 rack spaces.

Peavey ValveKing 100 Head $549.99 At the heart of the all-tube Peavey ValveKing 100 Head is a patent-pending, Class A/AB Texture control that allows variable selection and combination of Class A and Class AB power structures. This gives you the ability to coax a wide range of tones out of the ValveKing 100 Head. It features 12AX7 preamp and 6L6GC power amp tubes; 2 footswitchable channels with independent 3-band EQ and volume; footswitchable boost on the lead channel; global resonance, presence, and reverb controls; a buffered effects loop; and dual speaker jacks in parallel.

Peavey 6534 Plus 120W Tube Guitar Amp Head Black $1159.99 The 2-channel, 120-watt Peavey 6534+ guitar amplifier head is loaded with EL34 power tubes that give this American legend a British flavor. The extreme high gain and legendary tone of the 6505 Series is here in excess, but with a special new design that minimizes the noise that many high-gain tube amps generate. The Rhythm channel of the 6534+ guitar amp head is voiced to clean up nicely while still retaining its raw saturation. 6 select 12AX7 preamp tubes provide the tonal foundation for the Peavey 6534+. Both the Lead and Rhythm channels feature independent 3-band EQs, pre- and post-gain controls, and Peavey's patented Resonance and Presence controls which provide low-end enhancement and high-end boost, respectively. The guitar amp head's Rhythm channel also includes a bright switch and footswitchable Crunch boost. Additional features include footswitchable effects loop and preamp output.Made in the USA.

Peavey Butcher 100W Tube Guitar Amp Head Black $1199.99 Peavey's Butcher 100W tube guitar amp is a 2-channel amplifier with 5 - 12AX7 preamp tubes and 4 - EL34 power amp tubes. Both the Clean and Crunch channels feature independent 3-band EQ, plus master volume and preamp gain controls so guitarists can adjust the interplay between the preamp and power amp on each channel for an array of gain possibilities. Both channels on the Peavey Butcher tube amp head include a separate, footswitchable gain boost, while the Crunch channel also has a 12-way Punch selector that adjusts the low-end attack of the amplifier—a handy feature that helps match the amp head to various speaker enclosures.The master section on the Peavey Butcher amp head widens the range of possibilities with 2 footswitchable master volumes, so players can set one as a default and use the second as a solo boost; a patented Presence control that boosts the extreme high frequencies, giving the amp extra cut; and high and low gain inputs.On the Peavey Butcher's rear panel, the built-in Peavey MSDI microphone-simulated XLR direct interface eliminates the need for miking by allowing users to send the amp's signal directly to a recording device or mixing console. Additional controls on the tube amp head include a line out with level control; active effects loop with send and return level control; impedance selector; half-power switch; and a tube bias adjustment jack.

Peavey PV 3800 Power Amplifier $829.99 Add a 3,800W PV 3800 amp to your Bi-Pack system for a tri-amped system! The highest-power PV Series power amp utilizes a crossover specially tailored for subwoofers and the high power necessary to drive them. Load Fault Correction circuitry along with the famous DDT™ speaker protection and Turn On/Turn Off protection allow operation with greater efficiency, even under difficult loads and power conditions. The PV 3800 connects to a PV 1600 Bi-Pack through a simple 1/4" or XLR cable.

Peavey 3120 120W Tube Guitar Amp Head Black $999.99 The Peavey 3120 high-gain guitar amplifier head is a versatile 3-channel amp with 120 watts of power and a trio of distinct voices capable of producing guitar tones from crisp and clean to total high-gain saturation.The Peavey 3120 gives rock guitar players a triple-threat tone onslaught with generous amounts of gain, 120 watts of power, and 3 fully independent channels of all-tube, tone-shaping satisfaction. The Lead and Rhythm channels feature gain and volume controls and an active 3-band EQ, while the Clean channel offers nicely rounded tones crafted by a passive 3-band EQ and volume control. A global master volume governs the amount of power delivered by its 4 EL34 or 6L6GC power-amp tubes, while the Gain controls on the Lead and Rhythm channels adjust the amount of 12AX7 gain saturation.The 3120 rear panel hosts a unique Peavey custom tone control feature, a 3-setting damping switch that alters speaker resonance to create tight, medium, and loose tones—from a precise punch for rhythmic attack to a full, widely resonant sound. Also on the amp head's rear panel is a footswitchable effects loop with dedicated Send and Return controls and a Line Out with Level control.

Peavey Windsor Studio 20W 1x12 All-Tube Combo Amp Black $399.99 The single-channel Windsor Studio amplifier features a footswitchable Boost button that increases the preamp level. Now you have the flexibility of a dual-channel amp plus control over the dynamic response. You also get the rich distortion characteristics of Windsor amp's class-A tube power topology. The Boost function can be used as an overdrive feature for the power section or simply as a volume boost for soloing. This 15-watt amplifier uses two 12AX7 preamp tubes and one EL34 power-amp tube in a single-ended configuration with no negative feedback. The power section is designed to accommodate 6L6GC, 6550, 6CA7, KT88 and KT66 octal power tubes, as well as variations on those types. Peavey's exclusive Power Sponge™ output attenuator incrementally adjusts the power output of the amplifier while maintaining the distortion characteristics of the power amp at any chosen volume level. Also onboard is a transformer-balanced XLR direct output with a unique microphone simulator that allows players to send the amplifier signal to a recording device or front-of-house mix without the use of a microphone. Additional features on this Peavey amp include true spring reverb, preamp volume, master volume, three-band tone equalization, footswitchable effects loop and a single 12" loudspeaker.

Peavey Tour VB-2 Tube Bass Amp Head $899.99 The VB-2 is a Peavey bass amplifier head built around a tube power section that uses six EL34 tubes to deliver its stunning 225 watts of power. By adjusting the Clean Gain and Overdrive Gain controls on the footswitchable Clean and Crunch channels, respectively, you can dial in tones ranging from the snarling grit of rock and metal to the weighty thump of old-school dub and reggae to clean, punchy hi-fi-all while delivering the necessary "cut" to maintain a strong bass presence in live performances.Backing up the amplifier's tube growl is a 3-band EQ that combines the best attributes of passive and active tone controls. This section includes high and low controls, as well as a mid control with a four-position midrange selector switch that allows you to set the mid-frequency shift at 200, 400, 600 or 800 Hz.Peavey's patented Resonance and Presence controls, which adjust the damping factor at the low and high ends, respectively, along with a three-way speaker impedance selector, enable you to match the VB-2 to virtually any bass speaker enclosure. A footswitchable mute/tuner circuit and front-panel effects loop give players additional flexibility.

Peavey Vypyr 15 15W 1x8 Guitar Combo Amp Black $99.99 With double the processing power, models and effects of competitive modeling amplifiers, the VYPYR dramatically redefines the power and scope of modern guitar amplification. VYPYR amplifiers are based on powerful 32-bit, floating-point SHARC processors that enable highly detailed, accurate modeling as well as vastly enhanced flexibility and features than ever before available in guitar amplification.Featuring 24 amp channel models-both the clean and distorted channels of 12 popular amps for the first time anywhere—11 editable post-amp "rack" effects with dual-parameter control. The entire six-model VYPYR Series features the easy-to-use Peavey WYSIWYG (What You See Is What You Get) interface.

Peavey MAX 115 Bass Combo $299.99 The MAX 115 from Peavey packs a lot of punch into a compact, space-saving combo. Peavey's exclusive HyperVent technology pushes bass through specially designed ports that allow the woofer to perform at maximum efficiency. Its 60W of power drives a heavy-duty, custom-designed, 15" Peavey woofer to generate ample volume and punch. Wide tonal rangePeavey's exclusive, patented TransTube circuitry gives you a choice of 3 distinct voicings-MAX, Vintage, and Modern-for covering a wide range of sounds and music styles. A semi-parametric EQ adds further tone-shaping capability with low, mid, mid shift, and high controls.An all-purpose ampPerfect for most gigs, rehearsals, and with its CD input and headphone output, it's a great practice bass amp, too.

Peavey Tour TNT 115 600W 1x15 Bass Combo Amp Black $499.99 The Peavey Tour TNT 115 is a 600W bass guitar combo amp with a top loaded, kick-back cabinet design. A single 1/4" input has a bright switch and an active/passive switch. A pre-gain knob and a contour switch allow for a pre-shape EQ. A "crunch" switch adds a tube like distortion effect. EQ is controlled with high and low shelve controls and a 7-band graphic with a defeat switch. Also included is a one-knob compressor that has a defeat switch. An effects loop, footswitch input, master volume and DDT on/off switch completes the front panel of the Peavey Tour TNT 115. Lightweight Class D power drives the ceramic 15" speaker and high-frequency tweeter.

Peavey Vypyr 100 100W 2x12 Guitar Combo Amp Black $399.99 With double the processing power, models and effects of competitive modeling amplifiers, the VYPYR amp dramatically redefines the power and scope of modern guitar amplification. VYPYR amplifiers are based on powerful 32-bit, floating-point SHARC processors that enable highly detailed, accurate modeling as well as vastly enhanced flexibility and features than ever before available in guitar amplification.Featuring 24 amp channel models-both the clean and distorted channels of 12 popular amps for the first time anywhere-plus 11 editable preamp "stomp box" effects and 11 editable post-amp "rack" effects with dual-parameter control. Players can use up to five effects simultaneously. When used with the optional Peavey Sanpera foot controller, the possibilities further expand from 12 in-amp presets to 400 programmable presets, with an on-board looper and more. The VYPYR also acts as its own computer audio interface, with a built-in studio-quality USB 2.0 output on most models that is recognized by computers as an audio device. The entire six-model VYPYR Series features the easy-to-use Peavey WYSIWYG (What You See Is What You Get) interface.

Peavey Vypyr 75 75W 1x12 Guitar Combo Amp Black $299.99 With double the processing power, models and effects of competitive modeling amplifiers, the VYPYR dramatically redefines the power and scope of modern guitar amplification. VYPYR amplifiers are based on powerful 32-bit, floating-point SHARC processors that enable highly detailed, accurate modeling as well as vastly enhanced flexibility and features than ever before available in guitar amplification.Featuring 24 amp channel models-both the clean and distorted channels of 12 popular amps for the first time anywhere-plus 11 editable preamp "stomp box" effects and 11 editable post-amp "rack" effects with dual-parameter control. Players can use up to five effects simultaneously. When used with the optional Peavey Sanpera foot controller, the possibilities further expand from 12 in-amp presets to 400 programmable presets, with an on-board looper and more. The VYPYR amp also acts as its own computer audio interface, with a built-in studio-quality USB 2.0 output on most models that is recognized by computers as an audio device. The entire six-model VYPYR Series features the easy-to-use Peavey WYSIWYG (What You See Is What You Get) interface.

Peavey PV 1500 Power Amp $469.99 The Peavey PV 1500 Power Amp features Peavey's patented DDT distortion detection technique that virtually eliminates distortion. It also features Peavey's patented V-cooling design, which cools the power transistors more evenly than traditional heat-sink designs. 2-rackspace chassis.